transmit a continuous carrier with either 400 or 1020 hertz (Hz) modulation

이걸 번역하면

400 또는 1020 헤르츠(Hz) 변조로 연속 반송파를 송신하다.

라는 뜻이 나오는데 반송파가 뭔지 잘 이해를 못하겠습니다.



————

a. A low or medium frequency radio beacon transmits nondirectional signals whereby the pilot of an aircraft properly equipped can determine bearings and “home” on the station. These facilities normally operate in a frequency band of 190 to 535 kilohertz (kHz), according to ICAO Annex 10 the frequency range for NDBs is between 190 and 1750 kHz, and transmit a continuous carrier with either 400 or 1020 hertz (Hz) modulation. All radio beacons except the compass locators transmit a continuous three-letter identification in code except during voice transmissions
——————

이게 원문이고, 아래는 제가 번역한 겁니다
—————————
a. A low or medium frequency radio beacon은 장비가 장착된 항공기의 조종사가 스테이션의 bearing과 "home"을 결정할 수 있는 nondirectional 신호를 전송한다. 이러한 설비는 일반적으로 190~535킬로헤르츠(kHz)의 주파수 대역에서 작동하며, ICAO annex 10에 따르면 NDB의 주파수 범위는 190~1750kHz 사이이며, transmit continuous carrier(반송파) 400 or 1020Hz(Hz). Compass locators 제외한 모든 무선 신호는 음성 전송 중을 제외하고 코드로 연속적인 3글자 식별을 전송한다.
—————
전공 도서를 아싸리 번역해 보려고 하는데,
특정 주파수 대역에서 작동하는건 이해 했습니다.

근데 저 구간에서 왜 반송파가 발생하는지, 반송파가 뭔지 궁금합니다.